Change Of Recline Gas Cylinder - Meyra Netti DYNAMIC AdaptPro User Manual

5.6.4 CHANGE OF RECLINE GAS
CYLINDER
• Remove back cushion and fold up the arm
supports.
• Remove the back cylinder splint.
• Fold the chair-back forward.
• Remove the back cylinder cover by unscrewing
the 4 screws - shown green in the illustration.
1 pc 3 mm Allen key
• Unhook the wires attached to the cylinder head.
• Remove the cylinder by unscrewing it from the
cylinder head.
• Replace the cylinder with a new - with correct
strength for the user.
• Mount all parts that was removed.
• Adjust the wires.
• Fold up the chair-back and test if the solution
suits the user strength, and bring the user back
to upright position when his/her extension
movement ends..
34
My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11