Table of Contents
Advertisement
2. QUICK REFERENCE
The content of this page is a summary of the whole
manual. It gives you a brief introduction to the use
and care of the Netti Dynamic AdaptPro wheelchair.
The quick reference is not a replacement for
the manual, only a reminder/check list.
• Unpack the wheelchair (Chapter 5.1)
• Mount the main wheels (Chapter 5.3)
• Mount the front castors (Chapter 5.3)
• Rise the back rest and mount the recline gas strut
to the back rest using the locking bolt.
(Chapter 5.5)
• Adjust the arm supports (Chapter 5.7)
• Mount the cushions (Chapter 5.4 and 5.5)
• Mount the leg supports (Chapter 5.9)
• Adjust the push bow (Chapter 6.6)
• Mount the head support (Chapter 5.6)
• Mount accessory. (See chapter 5 for more
information. Mounting descriptions will follow the
accessory.)
• If electrical functions are mounted:
Connect the battery and start electrical functions
ADJUST THE WHEELCHAIR TO THE USER:
Adjust seat depth and eventually the
wheelchair balance, foot board height,
armrest height, head support height and
depth, chair back cushion height.
For more information about adapting the wheelchair
to the user please see
www.My-Netti.com knowledge and tools
For troubleshooting, see chapter 11.
For adjustments see chapters 5.
ANTI-TIP The rearward position of the
anti-tips are defined and placed in relation
to the drive wheels. They will follow the drive
wheels independently from which tilt angle
is used. This will secure the chair from tipping
backwards at any time.
10
My-Netti.com
Drive carefully!
Be aware that friction against pushrims can
create a warm surface.
Surface temperature of metal parts in frame
structure might increase when exposed to
direct sunlight.
Salt water can increase risk of corrosion.
Further precautions related to environmental
conditions not needed.
The anti-tips are always used for the safety of
the user.
When the chair is tilted rearwards, the
anti-tips are automatically moved backwards,
the brakes must always be used when leaving
the user in the backwards tilted position.
Be sure to lock all handles properly.
Watch out for pinching danger when folding
and unfolding, tilting, reclining and all other
adjustment movements.
If electrical functions are mounted:
Charge the battery daily.
If the chair has pneumatic tires: Make sure to
check tyre pressure every week and inflate to
keep 24" at 45 PSI, and 7" at 36 PSI
Never stand on the foot plates due to risk of
tipping forwards.
Never lift the wheelchair by the leg supports,
arm supports or head support.
Product configuration may vary between
different countries.
Illustrations may differ from the delivered
product.
For visually impaired people, manuals and
catalogues can be downloaded at
www.My-Netti.com
If in doubt - contact your dealer!
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
Advertisement
Table of Contents
