Table of Contents
Advertisement
3.2 HOW THE NETTI ADAPTPRO FRAME
WORKS
Netti Dynamic AdaptPro frame is a patented frame
construction with innovative tilt and recline functions.
It has been developed as an answer to the users seemingly
adverse requests for a very large tilt range, without
expenses of reduced stability and manoeuvrability. It is
also covering the need for low seating height for users
that use their feet to move the wheelchair by tripping.
The solution is a dynamic wheelchair frame that have a
short wheel footprint at upright sitting position - allowing
for very good manoeuvrability in narrow space - while it
increases the footprint as soon as the seating tilt function
is used. This allows the centre of gravity of the chair to stay
well within the wheels footprint at any tilted position -
which lead to very good stability at any time.
As an additional safety feature, the anti-tips follow the
backwards movement when the tilt function is activated.
Tilt range:
The patented Netti AdaptPro wheelchair frame allows for
extensive tilt range. On the Netti Dynamic AdaptPro it is
set from 5° forwards to 30° backwards.
THE TILT FUNCTION
is operated from the tilt handle at the left side on push
bow. The tilt and the recline handles are an innovation of
itself, opening the tilt function by grabbing around
the handle and rotating them.
TO OPERATE:
• Turn the tilt handle towards you and put
pressure to the push bar to tilt up or down.
The seating unit remains tilted in the position
where you let the tilt handle loose.
The tilt handle operates 2 tilt gas cylinders
sitting under the seat frame. via Bowden
control cables. The 2 gas cylinders are
operated simultaneously.
The tilt cable from the tilt handle goes to a
split box sitting on the frame. From the split box
2 wires - one to each cylinder are operated.
Tilt cylinder adjustments see chapter 5.6
14
My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
Advertisement
Table of Contents
