LEG SUPPORTS
Before any actions on the leg supports
the multifunction and bearing wheelchair
is to be secured against unintentional roll-
ing motions.
☞ Therefore observe chapter Brake on
page 12.
Lower leg support
For entry into, exiting or "scuttling" (forward
motion of the multifunction and bearing
wheelchair with the feet) the footplates (1)
are to be folded up and the calf pads (2)
folded outward in driving direction [3].
☞ Check the locking points!
–
Remove both feet from the footplates.
☞ Before starting to drive the footplates
resp. footboard need to be folded back
down [3] and the calf belt attached.
Footplates
The footplates can be folded outward and
up [3] resp. inward and down [4].
14
2
3
4
1