Arm Supports - Meyra Netti DYNAMIC AdaptPro User Manual

USER BRAKE - PARKING BRAKE
Push the red brake handle forward to lock the
brake one on each side of the chair.
Always use the brakes when the
wheelchair is left without attendant
standing close.

6.8.4 ARM SUPPORTS

Netti AdaptPro is equipped with swing away arm
supports.
LOCKING - UNLOCKING
The arm supports are locked in a horizontal
position to make sure the arm support does not
unintentionally swing away.
To unlock the arm support lock:
Push the small red handle close to the elbow -
rear end of the arm support pad - backwards and
swing the arm support up.
When the user is to leave the chair, the arm
support can be swung away. This makes the
transfer much easier. Please, see the illustration of
a chair with swing-away arm support.
ARM SUPPORT DEPTH ADJUSTMENT - DAILY
Netti AdaptPro has a easy to used arm-support-
pad depth.
Pull the red central knob under the arm pad and
slide the arm pad forwards or backwards to get
the best arm support position for the user.
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
59
My-Netti.com