Table of Contents
Advertisement
By upright normal seating with locked dynamic
function, the muscle tone of the neck and back
should be as low as possible for the user to prevent
sliding. The therapist will identify the correct recline
angle. A change of the recline angle from this
position can disturb the correct body position, and
cause an increased muscle tone in the neck.
Prototype
If the recline function is used during a transfer
situation or other situations, it is very important that
the recline angle is adjusted back to the correct,
original position when the user is back to a normal
seating position.
Wrong usage of recline can cause loss of position,
an increased risk of sliding, an increased danger of
shear strain and pressure sores.
6.3 OPERATING RECLINE:
RECLINING THE CHAIR BACK
Rotate the recline button on the right side of the
push bow and recline the chair back. It will stop
where you let loose.
Vinkelrett til setet
87°-90°
90°- 86°
Prototype
MAKE SURE THAT THE USER IS SAFE WHEN TILT OR
RECLINE ARE GOING TO BE ADJUSTED:
Tolerance for
The tilt and recline functions of all Netti Dynamic
non-tolerance
ISO 2768-m
wheelchair models are «one hand operations». This
APPROVALS
DO NOT SCALE DRAWING
DRAWN
is a benefit for the user: The care giver is able to
ST
MATERIAL
CHECKED
TREATMENT
establish eye contact and communicate with the user
FINISH
WEIGHT
when the tilt or recline function is going to be used.
This drawing is Alu Rehab A.S property and should not be copied or delivered to other firms or agents without our permission.
The user can feel more safe when tilted or reclined
while eye contact is maintained between attendant
and user.
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
90°-130°
90° - 133°
Bedriftsveien 23, N-4353 Klepp Stasjon
Tel.: +47 51786220 Fax.: +47 51786221
DATE
TITLE
Netti III comfortseat cmpl
11.11.2015
CREATED DATE
SIZE
PROJECTION
ITEM NO.
A4
20689
g
SCALE
1:15
REPLACED FOR
6.4 OPERATING TILT:
TILTING THE SEATING UNIT
Rotate the tilt handle on the left side of the push bar
and move the seating unit to desired position.
The relative angle between the body parts remain
the same when the seating unit is tilted. A tilt scale
on the side of the chair shows which tilt angle
has been chosen. Netti Dynamic AdaptPro can be
for- ward tilted -5° -and backwards tilted +30°. A
backward tilted seat unit can create position, an
decreased risk of sliding, an decreased danger of
shear strain and pressure sores.
0°-30°
0° - 16°
A forward tilted seat unit brings the user in a
position where activities, for instance by a table or by
standing up from the wheelchair, are supported.
Never leave the user alone when the seat is
Tolerance for
non-tolerance
tilted forwards. The user may slide forwards out of
ISO 2768-m
the chair.
DO NOT SCALE DRAWING
MATERIAL
TREATMENT
FINISH
This drawing is Alu Rehab A.S property and should not be copied or delivered to other firms or
DWG NO.
114159
REPLACED BY
-5° - 0°
0° - -9°
APPROVALS
DATE
TITLE
12.11.2015
DRAWN
ST
CHECKED
CREATED DATE
SIZE
A4
WEIGHT
61671.78 g
SCALE
55
My-Netti.com
PROJECTION
1:15
Advertisement
Table of Contents
