Grandis Fixed Leg Supports - Meyra Netti DYNAMIC AdaptPro User Manual

5.10.10 GRANDIS FIXED LEG SUPPORTS

The Grandis fixed leg supports require
Grandis leg support extension brackets.
MOUNTING OF LEG SUPPORT GRANDIS FIXED:
• Fold the foot plates up.
• Hold the leg support in the vertical profile, and
place the attachment bolt in the Grandis leg
support pull out-piece in an outward angle .
• Swing the leg support inwards and push slightly
downwards until it goes into locked position.
TO REMOVE THE LEG SUPPORT :
• Grab around the vertical profile and thereby your
hand is lifting the red lock lever.
• Lift up and turn outward.
Grandis Fixed leg support can also be delivered with
a foot plate - to be ordered separately.
GRANDIS FIXED LEG SUPPORT ADJUSTMENTS:
FIXED ANGLE ADJUSTMENT:
• Loosen the screw on the outside of the vertical
profile
• Swing the leg support to desired angle before
tightening and fixing.
FOOT PLATE HEIGHT ADJUSTMENT:
• Loosen the screw on the outside of the vertical
profile and
• Move the foot plate ( or foot board) to desired
height before tightening and fixing.
FOOT PLATE ANGLE ADJUSTMENT:
• Loosen the 2 screws on the outside of the foot
plate and rotate to desired angle before fixing.
• Details are also shown in chapter 5.10.9
5 mm Allen key
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
51
My-Netti.com