Adjusting leg support extension pieces allow for
adjusting for knee joints not being aligned with
the leg support knee joint.
• Remove the front cloth protection by unscrewing
the screw sitting underneath the cover.
• Loosen the 4 screws holding the extension piece
for the leg support.
• Set the extension piece to the required position.
• Fix the screws, tighten them with 25 Nm
By restless users, the extension piece should not
be pulled out more than 50 mm.
By setting the extension pieces at different
positions, it is possible to compensate for a
rotated pelvis or different length of thighs.
1 pc 5 mm Allen key
5.4.8 DYNAMIC SEAT PLATE LOCK
The dynamic seat swings up when the user sitting
in the chair - fixed with a pelvic stabilizer attached
to the seat plate, goes into extension.
The illustration show max swung up seat plate.
A seat plate limiter stops the upward movement.
When a Netti Dynamic AdaptPro is used as a seat in
a car, the seat plate swing-up-movement should be
locked to reduce the dynamic movement range in
the limited space.
The seat plate lock handles are positioned under
the seat plate in the rear,. They are easily reached
from behind.
Rotate each lock handle by 180 degree and the seat
plate is locked.
Unlock the seat plate as soon as the user is in
safe environments and is free to use the dynamic
functions.
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
29
My-Netti.com