Meyra Netti DYNAMIC AdaptPro User Manual page 15

THE RECLINE FUNCTION
is operated from the recline handle at the right side on
push bow.
THE RECLINE HANDLE ALSO OPERATES THE
DYNAMIC BACK FUNCTION.
The Dynamic function is open / active when the
indicator-line aligns with the open lock symbol.
The Dynamic function is closed when the indicator-
line aligns with the closed lock symbol.
The chair back can be reclined and locked in any angle
when the dynamic function is not active / open.
As default the dynamic functions are locked with no
dynamic back function.
ACTIVATING THE DYNAMIC FUNCTION:
• Turn the handle backwards - all the way down to
where the indicator line aligned with the open lock.
The recline handle automatic clicks in and stays in the
open position - the dynamic back is activated. This
action will move the back support to a ca 90 degree
angle referring to the seat plate. The user is now free to
push the back support backwards and will be assisted
to return to the upright position.
STOPPING THE DYNAMIC FUNCTION:
• Rotate the recline handle slightly backwards.
• Press the little handle on the left directly by the
recline handle.
• The dynamic function is stopped and the recline
handle rotates to the position where the indicator-
line aligned with the locked symbol.
LOCKING THE RECLINED BACK:
• Rotate the recline handle all the way backwards.
• Move the back to desired recline position and hold.
• Press the little handle on the left direct by the
recline handle. The rotating handle returns to where
the indicator line aligns with the lock symbol.
• The recline angle is locked.
Recline / dynamic gas cylinder adjustments see
chapter 5.6
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
15
My-Netti.com