Table of Contents
Advertisement
5.4.7 SEAT DEPTH - ADJUSTING AT THE SEAT
PLATE POSITION IN THE FRONT
The seat plate depth can be adjusted by pulling the rear
half backwards as described in the previous chapter.
When the seat plate depth has been changed, its position
on the seat frame must be adjusted to ensure that the set
plate fits correctly. The rear part of the seat plate shall refer
to the back Velcro and still have space enough to swing up
when cushions are mounted.
To adjust the seat plate position:
•
Tilt the wheelchair as far backwards as possible to get
access to the side of the seat frame
•
Remove the front cloth protection by unscrewing the
screw sitting underneath the cover.
•
Remove the rear set of 2 screws (on each side) shown
in green.
•
Pull out the seat plate with the leg support extensions
and fix when desired seat plate front position is
reached.
1 pcs 5 mm Allen key
By using the Velcro adjustment straps in the
chair-back you can gain some mm on the depth.
28
My-Netti.com
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
Advertisement
Table of Contents
