Arm Supports Adjusting; Arm Supports Height - At The Front; Arm Supports Height - At The Rear; Arm Supports Pad Depth - Meyra Netti DYNAMIC AdaptPro User Manual

5.8 ARM SUPPORTS ADJUSTING

5.8.1 ARM SUPPORTS HEIGHT -
AT THE FRONT
Adjust the arm support height to fit the user. The
height should give good underarm support without
lifting the shoulder. There are 4 height positions
available, with 18 mm distance between each.
• Unscrew and position the arm support in correct
height for the user.
1 pc 5 mm Allen key
ARM SUPPORTS HEIGHT -
AT THE REAR
If the adjustments at the front of the arm support is
not giving you enough height, please reposition the
arm support at the rear end.
There are 2 heights available with 58 mm distance.
• Unscrew and position the arm support in desired
height.
• From the new rear arm support position, fine
adjustments can be performed at the front.
1 pc 6 mm Allen key

5.8.2 ARM SUPPORTS PAD DEPTH

Adjustments to the depth position of the arm
support pad can easily be performed at need:
• Pull the red button under the armrest pad and
move the pad backwards and forwards as you
like it. It clicks into position once you let go of the
button.
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
37
My-Netti.com