Leg Supports - Meyra Netti DYNAMIC AdaptPro User Manual

5.10 LEG SUPPORTS

Netti Dynamic AdaptPro comes as a standard with
Netti DUAL Dynamic leg support. The chair can also
be equipped with following alternative leg supports:
• Angle adjustable leg support standard
• Electrical leg support
• Grandis leg support
• Universal leg support
• Amputation leg support
NETTI DYNAMIC DUAL FEATURES
Netti Dynamic Dual leg support is especial designed
for users pushing with uneven force with their
lower extremities providing an open kinetic chain.
Unilateral extension of the hip (left or right part of
the leg support goes down)
The gas cylinders works independent and allows for
the leg supports to extended differently - tilting the
foot-board sideways and also tilting it forwards.
This multitude of possible flexible movements -
gives the user freedom to perform voluntarily and
involuntarily leg movements to very high degree.
When the extension forces are reduced, the gas
cylinders gently brings the feet and legs back to the
original position.
The wear and tear on the wheelchair is substantially
reduced since the forces applied, are absorbed by
the gas cylinders and flexible system.
FUNCTIONAL OVERVIEW
the Netti Dynamic Dual leg supports allow
controlled open Kinetic Chain (oKC) movements
of the lower extremities of the user. Unlike static
wheelchairs, the user's distal segments are supported
but can move. This helps to gain control of the
proximal segments especially when the user cannot
info@solidworks.com
inhibit movements due to their medical condition.
Netti Dynamic system leg support DUAL allows for
dynamic:
• Plantar flexion of the feet (foot board pivots
anteriorly)
• Unilateral extension of the hip (single leg support
goes down)
• Knee extension: (leg supports move forwards).
When tone decrease, the lower extremities will be
supported towards their resting position.
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
41
My-Netti.com