Table of Contents
Advertisement
11. TROUBLESHOOTING
Symptom
Reason / Action
The wheelchair is
• The angle of the bearing house might not be 90°.
going askew
• Check that the front castors are fitted in the same height.
• The main wheel hubs might be incorrectly mounted.
• One of the brakes might be too tight.
• The user are sitting very askew in the chair
• The user might be stronger on one side than the other.
The wheelchair
• The main wheel hubs might be incorrectly mounted.
is heavy to
• Clean the front castors and forks for dirt.
manoeuvre
• Too much weight over the front castors
The wheelchair is
• Control that the front castors are not fixed too tight.
hard to turn
• Adjust the angle of the bearing house.
• Too much weight over the front castors adjust the point of
The front castors
• The front castors are not fixed properly.
are wobbling
• Check that the front forks are fitted in the same height.
• The angle of the bearing house might not be 90°.
• Too much weight over the front castors adjust the point of
The main wheels
• Clean and grease the quick release.
are difficult to
• Adjust the length of the hub bushing.
take off and put
on
The brakes are
• Adjust the drum brake.
not functioning
well
The wheelchair
• Check screws and adjustment points in general.
feels "shaky"
Please contact your dealer for information about authorized service facilities
that can give support if solution is not reached in this form.
When in need of spare parts, please contact your dealer.
When making changes affecting frame construction, contact dealer /
manufacturer for confirmation.
72
My-Netti.com
(Adjust the point of balance by moving the main wheels back).
balance.
balance.
Reference
in manual
5.3.2
5.3.3
5.3.4
5.3.5
5.3.2
5.3.3
5.3.3
5.3.4
5.3.2
5.3.3
5.3.4
5.3.6
5.3.7
Model: Netti Dynamic AdaptPro
Language: English Version: 2021-11
Advertisement
Table of Contents
