Teledyne SyriXus 65x Installation And Operation Manual page 118

SyriXus Series Pumps Installation and Operation Guide
Section 5 Continuous Flow Introduction, Installation, and Operation
EAR99 Technology Subject to Restrictions Contained on the Cover Page
5-20
• Temperature changes can cause pressure fluctuations. For
available temperature control options, contact Teledyne
ISCO.
• For correct overpressure response, shutdown must be set to
under
ON PUMP LIMIT
• Enter the same refill rate separately for pumps A, B, C, and
D.
The refill rate should always be as high as possible to allow
time for refill and repressurization before the next
switchover.
options.