Limits Menu; Limits Setpoint (Max Press) Menu - Teledyne SyriXus 65x Installation And Operation Manual

To set the limits
Figure 3-9 Limits menu
Figure 3-10 Limits setpoint (Max Press) menu
EAR99 Technology Subject to Restrictions Contained on the Cover Page
SyriXus Series Pumps Installation and Operation Guide
Section 3 Basic Programming and Operation
1. Press LIMITS. To display the Limits menu, enter the number of
the limit you wish to program. One of five limit setpoint menus
will appear: MAX PRESS, MIN PRESS, MAX FLOW, MIN
FLOW, or FLOW LIMIT. The MAX PRESS limit setpoint menu
is shown in Figure 3-10.
LIMITS:
1.
MAX PRESS _____
2.
MIN PRESS______
PUMP A
A
MAX PRESS_____PSI
1.
SET PRESS VALUE
ON
DISPLAY*
A
These features are discussed in "Limits Programming Options" in
Section 3.8.7 "LIMITS".
2. Press the number 1 key to set the value. A message will blink on
the right side of the screen, prompting you to enter the selected
limit.
3. Enter the desired limit setpoint, using the number keys.
4. Press ENTER to save the value.
The pump can be set to shut off or not shutoff dependent on this
limit condition by pressing softkey C under shutdown. This will tog-
gle this option to ON.
5. To exit the limit menu, press the softkey 'D', PREVIOUS. If four
pumps are connected, press STORE, RECALL, or CLEAR
ENTRY to exit the limits menu.
6. Once all the limits have been set, press softkey 'D', PREVIOUS,
to return to the main menu.
CURRENT PUMP
3.
MAX FLOW
4.
MIN FLOW
5.
FLOW LIMIT
C
B
ON OFF
ALARM* SHUTDOWN*
C
B
NOTE
NOTE
____
_____
_____
PREVIOUS
D
PREVIOUS*
D
3-13