Introduction - Teledyne SyriXus 65x Installation And Operation Manual

SyriXus Series Pumps Installation and Operation Guide
Section 9 Pump Maintenance, Troubleshooting, and Servicing

9.2 Introduction

9.3 Technical
Customer
Service
Department
Contact Information:
EAR99 Technology Subject to Restrictions Contained on the Cover Page
9-2
LINE VOLTAGE IS PRESENT INSIDE THIS UNIT AT
ALL TIMES, REGARDLESS OF SWITCH SETTINGS. IF
INTERNAL ADJUSTMENTS
NECESSARY,
DISCONNECTED TO REMOVE POSSIBLE SHOCK
HAZARD BEFORE OPENING THE INSTRUMENT
CASE.
This section contains maintenance and repair procedures which you
can do yourself or have done by a service technician on-site.
To view the schematic drawings referred to in this section, first find
the serial number for your unit. Contact the Teledyne ISCO Customer
Service Department and request a copy of the schematic for your unit.
You will need to provide the serial number so that the correct sche-
matic can be retrieved.
If you have a question about a procedure, need parts information, or
need assistance, call or email the Teledyne ISCO Customer Service
department. In your message, be sure to include all the details about
your instrument and the nature of the error.
Call the Service Department before returning the unit for factory
repair. Often a problem can be solved in the field with just a little
extra help.
Teledyne ISCO
Customer Service Dept.
4700 Superior Street
Lincoln, NE 68504-1398 USA
Email: IscoService@teledyne.com
Phone: General
Toll Free
Outside USA, Canada,
and Mexico
DANGER
OR
THE LINE CORDS
(800) 228-4373
(800) 775-2965
(402) 464-0231
REPAIRS ARE
MUST BE