Four Pump Stop Menu - Teledyne SyriXus 65x Installation And Operation Manual

SyriXus Series Pumps Installation and Operation Guide
Section 1 Introduction
Figure 1-13 Four pump stop menu
EAR99 Technology Subject to Restrictions Contained on the Cover Page
1-20
b. If four pumps are connected to the controller, you will be
prompted to press A to stop pump A, B to stop pump B, C to
stop pump C, D to stop pump D, or S
stop all pumps.
PRESS RUN KEY TO ESCAPE
PRESS STOP KEY TO STOP ALL
PUMP A
A
If you encounter any problems during the preliminary checkout,
please contact the Teledyne ISCO Customer Service Department
using the information in Section 9.3 "Customer Service Department".
In the event of an emergency, turn OFF the controller switch. This
will cause all pumps to immediately stop.
TOP
PUMP B PUMP C
B C
NOTE
a second time, to
PUMP D
D