Starting the Configuration Program
To start using the VCS program:
1.
Open VCS on your PC either by double-clicking the VCS icon (shown
at right) if one was placed on your desktop during installation, or by
clicking Start > All Programs > Extron Electronics> Videowall
Configuration Software. (This opening process may vary with the
operating system.) The Start screen opens, displaying the Connect to Device
window, Discover tab (see figure 70).
Figure 69.
2.
Select the New side tab (see figure 70,
Figure 70.
3.
Select the radio button for your Quantum Ultra Series device (Quantum Ultra or
Quantum Ultra Connect,
NOTE: You cannot proceed without selecting a device type.
Quantum Ultra Series Videowall Processing Systems • Remote Configuration and Control
Connect to Device Screen
1
VCS New Project Screen
).
2
) to open the Create New Project screen.
83