Extron electronics Quantum Ultra Series User Manual page 14

User-definable window borders and text labels enhance presentation and
•
simplify source identification — Custom color borders with rounded corners, drop
shadows, and transparency can be applied to any window type. A border can be set
to flash to draw attention to the source window. Border titles and overlay text can be
applied to a window and dynamically updated from the control system to indicate a
change in the source's name, type, status, or classification level.
• Output overlap for edge-blended applications — Output overlap feature supports
edge-blended applications by providing redundant image data for the projection
system's blended regions.
• Supports direct decoding of H.264 streams for presentation on the videowall
(IN SMD 100 card) — Eliminates the need for external decoders, reducing system
cost and complexity.
• Compatible with common industry streaming formats, including H.264,
MPEG-2, MPEG-4, and Motion JPEG (IN SMD 100 card).
• Decodes a wide range of streamed resolutions up to 1080p/60 (IN SMD 100
card) — Users can opt to decode more streams at lower resolutions or fewer
streams at higher resolutions, allowing efficient use of network and processing
bandwidth.
Supports the video sections of ONVIF Profile S (IN SMD 100 card) —
•
Compatible with a wide variety of H.264 encoders, IP cameras, media encoders, and
other streaming devices that also support ONVIF Profile S.
Independently-configurable network connections (IN SMD 100 card) — This
•
allows decoding resources to be shared within the same subnet or split across
multiple subnets, providing increased flexibility when designing complex streaming
networks.
• Transmits up to four outputs at distances up to 330 feet (100 meters) over
a shielded CATx cable (OUT4DTP card) — Reduces system complexity when
output extension is required for driving videowall displays up to 330' (100 m) away
from the Quantum Ultra Series processor.
Quantum Expansion IN and Quantum Expansion OUT cards link multiple
•
Quantum Ultra Series processors together to create a single large system.
• Selectable DTP, XTP matrix, and HDBaseT output modes (OUT4DTP card) —
Allows selection of the type of twisted pair technology best suited for the application.
• Power insertion enables remote powering of DTP receivers (OUT4DTP
card) — 12 V DC insertion at the OUT4DTP output card enables the DTP receivers
to be powered over the twisted pair connections, eliminating the need for separate
power supplies at the remote units. Requires one PS 124 per OUT4DTP card.
Bidirectional RS-232 and IR insertion for AV device control (OUT4DTP card)
•
— Bidirectional RS 232 control and IR signals can be transmitted alongside the video
signal over DTP connections, allowing the remote device to be controlled without
the need for additional cabling. Bidirectional control insertion eliminates the need for
control system wiring to remote devices.
RS-232 insertion from the Ethernet control port (OUT4DTP card) — System
•
level device control to all remote locations via the Quantum Ultra control port,
providing comprehensive control of endpoints and attached devices without needing
additional equipment.
Quantum Ultra Series Videowall Processing Systems • Introduction 6