Extron electronics Quantum Ultra Series User Manual page 75

X12@
= Verbose mode
0
= None (default for LAN connection)
1
= Verbose mode (default for RS-232 and USB connection)
2
= Tagged response for queries
3
= Verbose mode and tagged response for queries
NOTES:
•
In verbose response mode, the Quantum Ultra Series device returns unsolicited
responses for value and setting changes that may result from a signal change, or
a setting adjustment made via another interface.
Example: The processor can send out a notice of a change in some setting
without receiving a query via a PC or a control system. That change could have
resulted from an internal process or a selection made via the VCS program. This
is a verbose (wordy) relationship between the controller and a connected device.
•
If tagged responses are enabled, all "view" commands return the command
string plus the data, the same as in responses for setting a value. For example:
Command:
Response: Wndw P
X12&
= Date and time
Set date and time format — MM/DD/YY-HH:MM:SS
Example: 08/17/21-13:51:30
View date and time format —
Example: Tue, 17 Aug 2021 13:53:58
X13# =
Password
• Length is 1-128 characters.
• All human-readable characters permitted except
• The password cannot be a single space.
• Passwords are case-sensitive.
• A user password cannot be assigned if no administrative password exists. An
code is returned.
• If the admin password is cleared, the user password is cleared as well.
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of an absolute system reset, the
passwords convert to the default, which is
X14! =
Reading password. Response is four asterisks (
exists.
X14( =
Default name — Combination of model name and last three hexadecimal character pairs
of the unit MAC address (Example:
X17^ =
Network Interface
1
= LAN A
2
= LAN B
X17& =
Prefix (subnet mask bits). Subnet 255.255.255.0 is represented as a prefix value by
The default response for the
Quantum Ultra Series Videowall Processing Systems • Remote Configuration and Control
E P X# * X% WNDW }
X% X# X7* ]
* * (tagged) or
Www
{day of the week},
extron
****
QU610-00-02-3D
E CISG
command (on IPv4) is
X7* ]
(untagged)
DD Mmm YYYY HH:MM:SS
• • •
/ \ | *
and space characters.
E14
.
) if a password exists, empty if none
)
/24
.
.
error
/24
.
67