Extron electronics Quantum Ultra Series User Manual page 98

Reconfiguring an expansion system
To redo the configuration or repurpose the chassis into different systems:
1. Connect to the expansion system.
2. From the Tools menu, select Reset Devices.
In the Reset Devices window, select Reset Device Settings and Delete All
3.
Files (Retains TCP/IP Settings) (the second radio button).
4. Click Reset. The system reboots. After approximately 2 minutes, the expansion
devices appear listed separately in the device discovery panel, as shown in
on page 87.
Quantum Ultra Series Videowall Processing Systems • Remote Configuration and Control
figure 78
90