Extron electronics Quantum Ultra Series User Manual page 92

4. Click the Create button (see figure 70,
devices that are connected to the network and are the type of device selected in step
3. The Connection screen displays a list of detected Quantum Ultra Series devices
(see figure 71
1
Figure 71. Connection Screen
NOTE: Only devices of the selected type (Quantum Ultra or Quantum Ultra
Connect) are displayed in the Select Device(s) to Add panel (see step 6 to
change what is displayed).
5. If no devices appear in the panel, confirm that VCS is using the intended network
connection. If not, select a different network adapter as follows:
a. Click the Network Adapter button (
On the Network Adapter screen, select the desired network adapter to use to
b.
connect to the Quantum Ultra Series device chassis.
If no network adapters appear on the screen, select the Show All Network
Adapters checkbox (see figure 72,
Figure 72.
c. Click OK to confirm your selection. The Network Adapter screen closes.
Quantum Ultra Series Videowall Processing Systems • Remote Configuration and Control
3
).
).
2
).
1
Network Adapter Screen
on the previous page). VCS searches for
84