Extron electronics Quantum Ultra Series User Manual page 107

Figure 91.
5. Lift the power supply up slightly and slide it toward you, out of the chassis (see
figure 90 on the previous page and figure 91, above,
6.
Slide the new power supply into the empty slot vacated by the old power supply, until
its back panel is flat against the back wall of the power supply compartment.
Quantum Ultra Series Videowall Processing Systems • Maintenance — Quantum Ultra 610 Only
Sliding the Power Supply Out (Quantum Ultra II 610)
1
Slide the unit to the right.
Slide the unit out.
2 2 2
).
2
99