Videowall Configuration Software (Vcs) Program; Downloading Vcs From The Website - Extron electronics Quantum Ultra Series User Manual

Videowall Configuration Software (VCS) Program

The Extron VCS program is a PC-based program for the Quantum Ultra Series that
provides a convenient way to configure the videowall. System configuration is broken
down into logical tasks, including output and wall configuration, source setup, preset
design, and EDID Minder. Online and offline editing allows creation and configuration of
systems with or without a Quantum Ultra Series device connected.
Window presets are created by dragging and dropping sources onto a virtual
representation of the videowall. Offline configuration allows for videowall configuration files
to be created when the Quantum Ultra Series processor is temporarily unavailable.

Downloading VCS from the Website

To use the Videowall Configuration Software, download the latest version of the
program from the Extron web page and install it on the PC that will be connected to
the Quantum Ultra Series device, as described in the following sections. You can also
download updates to VCS as they become available. To access the software:
1.
Quantum Ultra Series Videowall Processing Systems • Remote Configuration and Control
On the Extron website, hover the mouse pointer over the
figure 67, ), then move the pointer to the
1
column and click it.
Figure 67. Software Link on the Download Page
tab (see
Download
link ( ) in the
Software 2 Downloads
81