Extron electronics Quantum Ultra Series User Manual page 93

6. On the Connection screen, locate your device on the list and click the Add to
System button at the left of the device name (see figure 73,
information is displayed in the System Devices panel (
Figure 73. Adding Devices to the System
If you do not see your device in the
a. Click Manually Add Device (see figure 73,
window opens.
Figure 74.
b. In the IP Address field, enter the address of the Quantum Ultra Series device to
be connected (see figure 74,
c. If necessary, select the Quantum Ultra Series device type from the Device Type
drop-down menu (
Click Add. The connection information for the device is displayed in the System
d.
Devices panel (see figure 73,
NOTE: A unit added this way is not shown in the Select Devices to Add panel.
7. Edit IP address settings for your device as needed.
a. In the Select Device(s) to Add panel, click the Edit button (see figure 75,
Figure 75.
b. The Communication Settings dialog box opens. In this window, enter a new IP
address and edit other IP settings as desired.
To enable Dynamic Host Configuration Protocol (DHCP), select the DHCP
checkbox (see figure 76,
available IP address is assigned automatically to the unit when it is connected to
a supporting network. All other IP settings fields become read-only.
Quantum Ultra Series Videowall Processing Systems • Remote Configuration and Control
Select Device(s) to Add
Manually Add Device Window
).
1
).
2
).
2
Editing a Device IP Address
on the next page). When this box is selected, an
1
). Connection
1
).
2
panel:
). The Manually Add Device
3
).
1
85