Align the new fan with the right wall of the chassis, the tabs facing toward the back
and the thumbscrew and cables facing outward, toward you.
Figure 100.
6.
Slide the fan straight back into the chassis until the tabs are inserted into the slots
(see figure 101,
under the fan and are accessible from the front.
Figure 101.
7.
When the fan unit is in place, use a screwdriver to tighten the thumbscrew.
8.
Connect the two fan cables.
Quantum Ultra Series Videowall Processing Systems • Maintenance — Quantum Ultra 610 Only
Slots for Tabs in the Back of the Fan Compartment
). Ensure that the ends of both cables are not trapped behind or
1
1 1 1
Inserting the Replacement Fan
Slots for tabs.
105