Buttons On The Control Panel; Loading Image Files - Extron electronics Quantum Ultra Series User Manual

Buttons on the Control Panel

The following buttons give you access to set up and manage the Quantum Ultra via the
Control Panel (see figure 47).
Figure 47.
NOTE: Most of these tasks cause the unit to restart to complete them. For certain
•
•
•
•
•
•
•
•

Loading Image Files

You can upload image files from an external USB drive to the Quantum Ultra Series
processor to be displayed as sources in windows and incorporated into presets. You can
also upload image files using VCS (see the VCS Help File for instructions).
The Quantum Ultra Series processor supports .bmp, .jpg, .tif, and .png image file types.
To upload image files to the Quantum Ultra Series hard drive:
1.
2.
Buttons on the Control Panel
actions, the unit may restart twice: once to disable write protection, and a
second time to finish applying the settings.
Add Picture Files ( ) — Enables you to load image files (.bmp, .png, .tif, or .jpg)
1
to the Quantum Ultra D: drive (see "Loading Image Files — Quantum Ultra 610 and
305"). These pictures are then available to display on the videowall (see the VCS Help
File to add images to the videowall project).
NOTE: This function is not available on the Quantum Ultra Connect models.
Update Password ( ) — Enables you to update the hardware password to access
2
the Quantum Ultra Control Panel (see
Update Firmware ( ) — Provides options to install new firmware or roll back to a
3
previous version (see Updating Firmware
) — Displays the Network Settings window, from which you
Network Settings (
4
can view or modify the IP addresses of the LAN A and LAN B ports (see
Network Settings from the Control Panel
Reset Device ( )— Enables you to reset the Quantum Ultra to different levels of the
5
Resetting the Device from the Control Panel
default state (see
Service Mode ( ) — Provides access to the file system and a shortcut to the
6
operating system control panel, where you can update the date and time (see
Service Mode on page 60).
Disable Write Protection (
desired (see Disabling and Enabling Write Protection
Shut down ( ) — Performs an orderly shutdown of the Quantum Ultra system (see
8
Shutting Down the Device
Connect the external USB drive containing the images to one of the rear panel
System USB ports.
On the Quantum Ultra Control Panel window, click Add Picture Files.
Quantum Ultra Series Videowall Processing Systems • Operation
Updating the Password
on page 54).
on page 58).
) — Enables you to make changes on the C: drive if
7
on page 61).
on page 53).
Modifying
on page 59).
on page 61).
51