Modifying Network Settings From The Control Panel - Extron electronics Quantum Ultra Series User Manual

11.

Modifying Network Settings from the Control Panel

To change the IP addresses of the LAN A and LAN B ports:
1.
When the installation is completed, Success! appears in the upper-left corner of the
screen.
A prompt appears, telling you to restart the Quantum Ultra.
Click OK.
Figure 59. Restart Prompt after Firmware Update
ATTENTION:
• Wait until the opening screen appears before performing any other
operations.
• Attendez jusqu'à ce que l'écran d'accueil apparaisse avant d'effectuer une
quelconque opération.
On the Control Panel window, click the Network Settings button (see figure 47,
on page 51. The Network Settings window opens.
4
Figure 60. Network Settings for LAN A Port
Quantum Ultra Series Videowall Processing Systems • Operation 58