Disabling And Enabling Write Protection; Shutting Down The Device - Extron electronics Quantum Ultra Series User Manual

Disabling and Enabling Write Protection

Should you want to make changes to items on the C: drive, you must disable write
protection as follows:
1.
2.
To enable write protection:
1.
2.

Shutting Down the Device

If required, use one of the following methods to shut down the Quantum Ultra Series
device:
•
•
•
To perform an optional orderly shutdown:
1.
2.
On the Control Panel, click the Disable Write Protection button (see figure 47,
on page 51). The following restart prompt appears:
7
Figure 63. Restart Prompt for Disabling Write Protection
Click OK. The unit reboots. The button turns red, and its text changes to Enable
Write Protection.
Figure 64. Write Protection Disabled
Click the red Enable Write Protection button. The following prompt appears:
Figure 65. Restart Prompt for Enabling Write Protection
Click OK. The unit reboots and Write Protection is enabled.
When a keyboard, mouse, and monitor are attached, the processor can be shut down
via the Control Panel.
If logged into the Quantum Ultra Series operating system, momentarily press the rear
panel power switch.
Press and hold the rear panel power switch for 5 seconds (see
on pages 16 and 17).
C
Click Shut down. A confirmation prompt appears.
Click OK on the prompt window. The unit shuts down.
Quantum Ultra Series Videowall Processing Systems • Operation
figure 7 and figure 8,
61