Extron electronics Quantum Ultra Series User Manual page 96

5.
When the connection screen is displayed, the device list contains one item, the
primary chassis, representing the expansion system. Quantum Ultra Expansion
is displayed in the Model column (see figure 80,
the columns (IP Address, Device Name, and Connection columns) applies to
the primary device in the chain.
Click the Add to System button in front of the Quantum Ultra Expansion line
( ) to add the expansion chain to the System Devices panel.
2
Figure 80. Quantum Ultra Expansion Chain in the Device Discovery Panel
Only information on the primary device is displayed in the System Devices panel.
However, an Expansion Device Details button appears below the device in the
panel. Click this button to display a drop-down list of the IP addresses of all the
chassis in the chain (see figure 81,
Figure 81. Expansion Details List in the System Devices Panel
6. Configure the videowall (see the VCS Help File).
Quantum Ultra Series Videowall Processing Systems • Remote Configuration and Control
). The information in the rest of
1
).
1
88