Updating The Password - Extron electronics Quantum Ultra Series User Manual

Updating the Password

To change the password to access the operating system:
1.
2.
3.
4.
Click the Update Password button on the Control Panel window (see figure 47,
on page 51). The unit may restart to disable write protection before proceeding
2
with the next step.
On the Change Password window, enter in the appropriate fields:
The current password (the default password is extron)
•
• The new password
• The new password again to confirm it
Figure 50. Change Password Fields
Click the Enter button at the bottom of the Change Password window. The following
prompt opens, informing you that the unit will reboot and enable write protection for
the new password to take effect.
Figure 51. Password Reboot Prompt
Click OK to reboot.
Quantum Ultra Series Videowall Processing Systems • Operation 53