Panel Id; Acp Panel Button Control Types; Action-Fixed - Extron electronics DMP 128 Plus User Manual

Panel ID #

Panel ID numbers (ID #) are used to identify ACP panels connected to the DMP 128 Plus
and are necessary for the panel to function. The ID # is set using the DIP switch assembly
on the physical ACP panel. Once the panel ID has been set on the physical device, the
ID is selected in the
DSP Configurator (for information on how to set the panel ID #, see the corresponding ACP
panel setup guide).

ACP Panel Button Control Types

Click on a button or rotary control within the panel image to select that button for
configuration. When selected, the button or control will turn yellow to indicate that it is
active for configuration, and the
drop-down lists for that purpose. First, one of the following control types must be selected:
•
•
•
There are two basic control types: Action and Selector. Action controls can be either
Action-Fixed or Action-Follow Selector. A button with dedicated functionality, such as a
rotary knob or dedicated volume or mute buttons, can only be configured as an Action
control type.

Action-Fixed

Buttons configured with the Action-Fixed control type perform an action that is tied to a
fixed group, preset, or macro, and is not affected by or dependent on selections made on
other buttons. When
a series of drop-down list selections shown in the table below. When a selection is made in
the
Action
Group Mute On
Group Mute off
Group Mute Toggle
Group Volume Down
Group Volume Up
Group Vol Rotary
(ACP 100 only)
Preset Recall
Preset Toggle
Macro Trigger
Macro Toggle
Figure 164.
Configure ACPs
Action-Fixed
Action-Follow Selector
Selector-Vol/Mute
Action-Fixed
list, the
Action Configure ACPs
Select 1
Mute Master
Mute Master
Mute Master
Volume Master
Volume Master
Volume Master
Preset
Preset 1
Macro
Macro 1
Action-Fixed Selection Table
dialog box when the panel is being configured in
dialog box will populate with a series of
Configure ACPs
is selected, the
Configure ACPs
dialog then populates with subsequent selections.
Select 2
—
—
—
—
—
—
—
Preset 2
—
Macro 2
DMP 128 Plus • Audio Control Panels
dialog populates with
LED Behavior
Reflects Current State
Reflects Current State
Reflects Current State
Reflects Current State
Reflects Current State
Reflects Current State
Reflects Current State
Lit press/Unlit release
Toggles Lit/Unlit
Lit press/Unlit release
Lit press/Unlit release
Toggles Lit/Unlit
99