Upgrading From 8X To 16X 2.5-Inch Hdd/Ssd Configuration - Fujitsu PRIMERGY RX2520 M5 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
▶ Insert all dummy modules, see
module" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
7.5.9 Upgrading from 8x to 16x 2.5-inch HDD/SSD
configuration
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Removing the air duct" on page
▶
"Removing the fan holder" on page
Installing the second 2.5-inch HDD backplane
▶ Install the second backplane, see
page 187.
▶ Connect the cables to the second backplane, see
HDD backplane" on page
▶ Connect the power cable from the second backplane to connector "PWR2"
on the system board.
190
"Installing a 2.5-inch HDD/SSD dummy
177.
51.
57.
58.
"Installing a 2.5-inch HDD backplane" on
188.
Upgrade and Maintenance Manual
56.
88.
Hardware: 10 minutes
Software: 10 minutes
65.
45.
46.
47.
60.
"Connecting a 2.5-inch
RX2520 M5