O2: Keypad Operation - YASKAWA GA800 Maintenance & Troubleshooting

No.
Name
(Hex.)
o1-45 3rd Monitor Area Selection
(11C5)
RUN
o1-46 3rd Monitor Area Setting
(11C6)
RUN
o1-47 Trend Plot 1 Scale Minimum
Value
(11C7)
RUN
o1-48 Trend Plot 1 Scale
Maximum Value
(11C8)
RUN
o1-49 Trend Plot 2 Scale Minimum
Value
(11C9)
RUN
o1-50 Trend Plot 2 Scale
Maximum Value
(11CA)
RUN
o1-51 Trend Plot Time Scale
Setting
(11CB)
RUN
o1-55 Analog Gauge Area
Selection
(11EE)
RUN
o1-56 Analog Gauge Area Setting
(11EF)
RUN
o1-58 Motor Power Unit Selection
(3125)
◆

o2: Keypad Operation

No.
Name
(Hex.)
o2-01 LO/RE Key Function
Selection
(0505)
o2-02 STOP Key Function
Selection
(0506)
o2-03 User Parameter Default
Value
(0507)
o2-04 Drive Model (KVA)
Selection
(0508)
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis value used to display the monitor set in o1-26 [Custom Monitor 3] as a bar
graph. This parameter is only available with an LCD keypad.
0 : +/- Area ( - o1-46 ～ o1-46 )
1 : + Area ( 0 ~ o1-46 )
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis value used to display the monitor set in o1-26 [Custom Monitor 3] as a bar
graph. This parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis minimum value used to display the monitor set in o1-24 [Custom Monitor 1]
as a trend plot. This parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the maximum value for the vertical axis used to display the monitor that was set in o1-24
[Custom Monitor 1] as a trend plot. This parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the horizontal axis minimum value used to display the monitor set in o1-25 [Custom Monitor 2]
as a trend plot. This parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the maximum value for the vertical axis used to display the monitor that was set in o1-25
[Custom Monitor 2] as a trend plot. This parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the time scale (horizontal axis) to display the trend plot. When you change this setting, the drive
automatically adjusts the data sampling time. This parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the range used to display the monitor set in o1-24 [Custom Monitor 1] as an analog gauge. This
parameter is only available with an LCD keypad.
0 : +/- Area ( - o1-56 ～ o1-56 )
1 : + Area ( 0 ~ o1-56 )
V/f CL-V/f OLV CLV AOLV
Sets the value used to display the monitor set in o1-24 [Custom Monitor 1] as an analog meter. This
parameter is only available with an LCD keypad.
V/f CL-V/f OLV CLV AOLV
Sets the setting unit for parameters that set the motor rated power.
0 : kW
1 : HP
V/f CL-V/f OLV CLV AOLV
Sets the function that lets you use
0 : Disabled
1 : Enabled
V/f CL-V/f OLV CLV AOLV
Sets the function to use on the keypad to stop the drive when the Run command source for
the drive is REMOTE (external) and not assigned to the keypad.
0 : Disabled
1 : Enabled
V/f CL-V/f OLV CLV AOLV
Sets the function to keep the settings of changed parameters as user parameter defaults to use during
initialization.
0 : No change
1 : Set defaults
2 : Clear all
V/f CL-V/f OLV CLV AOLV
Sets the Drive Model code. Set this parameter after replacing the control board.
3.13 o: Keypad-Related Settings
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
to switch between LOCAL and REMOTE Modes.
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Default
(Range)
0
(0 - 1)
100.0%
(0.0 - 100.0%)
-100.0%
(-300.0 - +300.0%)
100.0%
(-300.0 - +300.0%)
-100.0%
(-300.0 - +300.0%)
100.0%
(-300.0 - +300.0%)
300 s
(1 - 3600 s)
1
( 0, 1 )
100.0%
(0.0 - 100.0%)
1
(0, 1)
Default
(Range)
1
(0, 1)
1
(0, 1)
3
0
(0 - 2)
Determined by the drive
(-)
245