Analysis; Actual Values; Stored Values - Bosch rexroth Nexo Manual

Bosch Rexroth AG | Tightening Technology
184/279
9.4

Analysis

The Analysis menu contains the following menu items:
•
•
•
•
The various screens additionally provide the following information:
J (job number), P (tightening program number), S (step in tightening program), OC (switch-off criterion),
QC (quality code), Ch (tightening channel) and RC (rework code).
The measured value recording ends when the specified target value is reached, as soon as the torque
value is below 5 % of the spindle overload. After 200 ms at the latest.
9.4.1

Actual values

Analysis  Actual values
Use this menu item to call up a window displaying the results of the current tightening jobs.
Result display:
•
•
•
Table 9–4:
Element
Previous step
Next step
9.4.2

Stored values

Analysis  Stored values
Use this menu item to call up a window displaying the results of an internally stored tightening job.
Result display:
•
•
•
Table 9–5:
Element
<<
<
<number>
>
>>
Filter

Previous step
Next step
Actual values (page 184)
Stored values (page 184)
Actual graph (page 185)
Stored graphs (page 185)
Torque (T)
Angle (A)
Time (t)
Actual values tab
Torque (T)
Angle (A)
Time (t)
Stored values tab
Description
Displays the actual values of the previous step
Displays the actual values of the next step
Description
Jumps to the first stored tightening job
Jumps to the previous stored tightening job
Enter a tightening number. The result of the respective tightening job will then
be displayed in the stored values.
Jumps to the next stored tightening job
Jumps to the last stored tightening job
See button Filter (see page 186)
Depending on the filter, the number of saved tightenings will be displayed.
Displays the actual values of the previous step
Displays the actual values of the next step
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2019-
3 608 870 A47