Adjusting The Angle Head - Bosch rexroth Nexo Manual

3 608 870 A47
4.2

Adjusting the angle head

NOTICE
Improper handling may cause damage!
Damage to the hand-held nutrunner.

You can adjust the angle head in 45° increments.
NXA011S and
NXA015S
Tools required (not included in the scope of delivery):
•
•
Fig. 4–1:
1.
2.
Fig. 4–2:
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2019-10
Attach the mounting aid only in the clamping area allowed for the torque support (see
the torque support on page 45).
Open-end wrench, wrench size 22 mm. Recommendation: Use the mounting aid for ESWM
3608876473 angle heads instead of the open-end wrench.
Open-end wrench, wrench size 27 mm
1
2
Loosening the angle head
Use open-end wrench 3 to hold the hand-held nutrunner at wrench face 4 of the angle head flange
(see figure 4–1).
Use open-end wrench 1 to loosen the union nut at wrench face 2 (see figure 4–1).
1
18 + 4 Nm
2
5
Adjusting the angle head and tightening the lock nut
Tightening Technology | Bosch Rexroth AG
4
3
3
43/279
Attaching