Bosch rexroth Nexo Manual page 223

3 608 870 A47
File button
Click on the button to display the File dialog. In the dialog, the respective parameters for storage of results
data can be edited, deleted or additional memory parameters added.
Table 9–70:
Element
Output format
File name
File extension
Sub-directory
Number of files
Add
Edit
Remove
Move up / Move down
Save
Discard
Restore defaults
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2019-10
Memory dialog
Description
Output format for results data.
– Type
Selection of the json output format.
– JSON-formatted
Select yes to display the results data in a readable JSON format
(including line breaks and spaces). Select no to receive an unformatted
JSON data set.
Display on selection of FTP, NX-SD card and File Share:
Under file name the file name for the saved results data file is defined. The
file name can be composed of different parameters. Activate the respective
parameters. Additional user-defined parameters can be added.
Display on selection of FTP, NX-SD card and File Share:
Displays the file extension json of the saved results data file.
Display on selection of FTP, NX-SD card and File Share:
Under Sub-directory, a sub-directory is created. The file name of the sub-
directory can be composed of different parameters. Activate the respective
parameters.
Display on selection of NX-SD card:
On the applied file system of the NX-SD card, sub-directories can only
contain a defined number of files. Due to this restriction, an additional sub-
directory with the current time stamp (YYYY-MM-DD_hh-mm-ss) is created
in the configured directory for storage of each results data set. If the
configured number of files is reached, a new sub-directory is automatically
generated with the current time stamp for storage of the results data.
A maximum of 10000 result data records per sub-directory can be stored.
Click Add to add a new parameter.
Click Save to save the changes or Cancel to discard the changed data.
Click Edit to edit a memory parameter. Change the presettings and click
Save to save the changes or Cancel to discard the changed data.
Click Remove to remove a parameter.
Click Move up or Move down to change the order of parameters for
composition of the file name of the sub-directory.
Click Save to save the edited data.
Click Discard to discard the edited data.
All settings in this dialog are reset to the factory setting.
Tightening Technology | Bosch Rexroth AG 223/279