Bosch rexroth Nexo Manual page 96

Bosch Rexroth AG | Tightening Technology
96/279
MID 0032 Job data upload request
Sent by:
Request to upload the parameters of a job.
Note: -
Revision:
Data field:
Possible response:
Job numbers upload response
Command error
MID 0033 Job data upload response
Sent by:
Transmission of the job parameters of the selected job.
Note: -
Revision:
Data field:
Total data length: 71 bytes + 12 bytes x number tightening programs (revision 001),
73 bytes + 12 bytes x number tightening programs (revision 002)
Possible response:
Table 7–19:
Parameter
Job number
Job name
Order
superordinate computer
001 (supported by Rexroth OP)
Job number, 2 bytes
MID
0033
0004
Tightening controller
001, 002 (supported by Rexroth OP)
none
MID 0033 revision 001
Comments
Job number
The value consists of two ASCII characters.
ID
Value range
Presetting
Example:
Job number
Value
The program name is output. If the job name is shorter than 25 characters,
the field will be filled with space characters.
The value consists of 25 ASCII characters.
ID
Value range
Presetting
Example:
Job name
Value
Order of processing of the counter steps in the job.
– 0: free order (not supported)
– 1: forced order
Single-program step
– 2: free and forced order (not supported)
– Space character "": no order, only auxiliary steps
ID
Value range
Presetting
Example:
Order
Value
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2019-10
Error no. Comment
- All valid job data in the tightening controller is
transferred as a result of this command.
02 Job not available.
01
00 – 99
-
01
01
02
0x20 – 0x7F
-
Job1
Job1
03
0 – 2
-
1
1
3 608 870 A47
Bytes
2
2
2
25
2
1