Bosch rexroth Nexo Manual page 68

Bosch Rexroth AG | Tightening Technology
68/279 3 608 870 A47
The signal is only updated outside of the tightening operation.
Stick slip
Stick slip too high: Number of stick slips too high
Results description after a completed tightening sequence. The number of stick slips is above the defined
tolerance window.
TimeH Time too high: Time too high
Results description after a completed tightening sequence. The time is above the defined tolerance
window.
ToolBn Tool button: Status of the tool button on the nutrunner
This signal shows the status of the tool button on the cordless Wi-Fi nutrunner. Holding down the tool
button keeps the signal at "high", releasing it changes the signal to "low".
This signal is only active for tightening channels with ErgoSpin. The signal is only updated outside of the
tightening operation.
TorqH Torque too high: Torque too high
Results description after a completed tightening sequence. The torque is above the defined tolerance
window.
TorqL Torque too low: Torque too low
Results description after a completed tightening sequence. The torque is below the defined tolerance
window.
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2019-10