Bosch rexroth Nexo Manual page 218

Bosch Rexroth AG | Tightening Technology
218/279
Data button
Click on the button to display the Data dialog. In the dialog, the parameters for output of tightening results
can be configured. Depending on activation, the output of OK tightening and/or NOK tightening results
data is realized differently.
Table 9–64:
Element
Tightening result / Step result
Add
Edit
Remove
Move up / Move down
Save
Discard
Restore defaults
Parameters dialog
Description
Under Tightening result or Step result, the parameters for OK tightening
and/or NOK tightening output are defined. To do so, activate the respective
check box. For an overview of parameters, see
Click Add to add a new user-defined parameter.
Click Save to save the changes or Cancel to discard the changed data.
Click Edit to edit a user-defined parameter. Change the presettings and click
Save to save the changes or Cancel to discard the changed data.
Click Remove to remove a user-defined parameter.
Click Move up or Move down to change the order of parameters in the
results data record.
Click Save to save the edited data.
Click Discard to discard the edited data.
All settings in this dialog are reset to the factory setting.
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2019-
3 608 870 A47
on page 219.