Bosch rexroth Nexo Manual page 247

3 608 870 A47
Table 9–97:
Element
NOK result
System errors
Save
Discard
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2019-10
LED tab
Description
Activate this check box in order to enable the tightening position illumination
for an NOK tightening.
– Illumination LED
Intensity: Use the slider control to define the brightness of the illumination
LED.
– Signal LED
RGB: Use the slider to define the color of the signal LED in the RGB color
space (red, green, blue).
– Delay
Sets the delay between reception of the result and turning off the
tightening position illumination. Values from 0 to 30 seconds are valid.
– Flashing cycle
Sets the flashing cycle of the tightening position illumination.
Activate this check box in order to enable the tightening position illumination
in case of a system error.
– Illumination LED
Intensity: Use the slider control to define the brightness of the illumination
LED.
– Signal LED
RGB: Use the slider to define the color of the signal LED in the RGB color
space (red, green, blue).
– Flashing cycle
Sets the flashing cycle of the tightening position illumination.
Click Save to save the edited data.
Click Discard to discard the edited data.
Tightening Technology | Bosch Rexroth AG 247/279