Bosch rexroth Nexo Manual page 196

Bosch Rexroth AG | Tightening Technology
196/279
Timeout options
Table 9–27:
Element
Timeout
Error message
Scan options
The field is only displayed, if Scanner is selected as ID input source.
Table 9–28:
Element
Trigger scan process
Laser on time
Acoustic signal
Barcodes
The field is only displayed, if Scanner is selected as ID input source. Activate the respective barcode
types.
9.6.3.3 Single program
This job step comprises the basic functions for a single job sequence.
General
This panel defines the general properties of the job.
Table 9–29:
Element
Name
Comments
ID input step dialog - timeout options panel
Description
Enter the maximum time when an event, e.g. a successful barcode scan, has
to take place. If no event occurs in this time, the step is terminated.
Enter an error message that will be displayed on the nutrunner display after
the timeout.
ID input step dialog - scan options panel
Description
The scan process can be selected using the following option:
– Start switch
– Center function key
– Function key Left
– Function key Right
– PLC signal
Maximum time span that the laser is turned on.
If the check box is activated, an acoustic signal will resound after recognition
of a barcode.
Click the icon to insert a new single program step in the job program before the selected
step. Double clicking the step or the respective icon opens the corresponding dialog for
entering the parameters.
Single program dialog - general panel
Description
Step name
Admissible characters are ASCII characters, numbers, spaces, hyphens,
dashes and underscore.
Description of the job step
Admissible characters are ASCII characters, numbers, spaces, hyphens,
dashes and underscore.
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2019-
3 608 870 A47