Intended Use - Bosch rexroth Nexo Manual

Bosch Rexroth AG | Tightening Technology
20/279
•
•
•
•
•
•
•
•
•
•
2.10

Intended use

The electric tools NXA, NXP, NXV are complete machines within the meaning of the currently valid
Machinery Directive, see "EU Declaration of Conformity" in the "Nexo" operating manual.
You may use the electric tool as follows:
•
•
•
This electric tool is not suitable for tightening processes requiring stepwise tightening of the connection
elements, e. g. impact wrenches.
Never use this electric tool as a lever or hammer. This electric tool is not suitable as a drill.
The electric tool is intended for industrial use and not for private use.
The electric tool may be commissioned only after it is has been integrated into the machine/system for
which it is designed and the machine/system fully complies with the EC Machinery Directive. Observe the
operating conditions and performance limits specified in the technical data.
Operation of the electric tool is only permitted in accordance with the national regulations for the
electromagnetic compatibility (EMC) for the respective application.
For instructions on EMC-compliant installation, refer to the documentation for the respective component.
Only accessories and add-on units that have been approved for use in Rexroth tightening systems may
be used therein. Non-approved components may neither be added nor connected to the system. The
same applies to cables, lines and batteries which belong to the Rexroth Tightening System. Otherwise,
functional and system safety is jeopardized.
Intended use includes having read and understood this documentation and especially the chapter "Safety
instructions".
Use power tools only when they are in good technical order and condition.
You may only commission the power tool if it has been determined that the end product (e.g., machinery or
a system) in which the Rexroth products are installed complies with the country-specific conditions,
safety regulations and standards of the application.
Do not open the battery. There is a risk of short-circuiting.
Do not short-circuit the battery. The battery might explode.
Do not use batteries if their housing or contacts are damaged. There is a risk of short-circuit.
Defective batteries must be stored in fire-resistant containers. There is a risk of fire.
For integration in partly completed machinery or in a machine and/or system,
For performing tightenings requiring a continuous course of the torque.
Electric tools with protective insulation for battery assembly (accessory NXAP030 or NXPP012) may
be used for tightening of individual live cell modules of voltage class up to 800 V.
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2019-10
3 608 870 A47