Table of Contents
Advertisement
182/263
Bosch Rexroth AG | Tightening Technology
9.4
Analysis
The Analysis menu contains the following menu items:
•
•
•
•
The various screens additionally provide the following information:
J (job number), P (tightening program number), S (step in tightening program), OC (switch-off criterion),
QC (quality code), Ch (tightening channel) and RC (rework code).
9.4.1
Actual values
Analysis Actual values
Use this menu item to call up a window displaying the results of the current tightening jobs.
Result display:
•
•
•
Table 9–4:
Element
Previous step
Next step
9.4.2
Stored values
Analysis Stored values
Use this menu item to call up a window displaying the results of an internally stored tightening job.
Result display:
•
•
•
Table 9–5:
Element
<<
<
<number>
>
>>
All
OK
NOK
Previous step
Next step
Actual values
(page 182)
Stored values
(page 182)
Actual graph
(page 183)
Stored graphs
(page 183)
Torque (T)
Angle (A)
Time (t)
Actual values tab
Torque (T)
Angle (A)
Time (t)
Stored values tab
Description
Displays the actual values of the previous step
Displays the actual values of the next step
Description
Jumps to the first stored tightening job
Jumps to the previous stored tightening job
Enter a tightening number. The result of the respective tightening job will then
be displayed in the stored values.
Jumps to the next stored tightening job
Jumps to the last stored tightening job
Displays all of the stored tightening jobs
Displays nothing but stored OK tightening jobs
Displays nothing but stored NOK tightening jobs
Depending on the selection of All, OK or NOK, the number of saved tighten-
ings will be displayed.
Displays the actual values of the previous step
Displays the actual values of the next step
Nexo cordless Wi-Fi nutrunner | 3 608 870 A47/2017-
3 608 870 A47
Advertisement
Table of Contents
