Interpreting Extension Blade Leds; Sx6 Extension Blade Leds; Extension Blade Led Descriptions - IBM SAN256B-6 Installation, Service And User Manual

|

Interpreting extension blade LEDs

Refer to the following illustration and table to interpret the LED patterns on the SX6 extension blade. The
LED patterns may temporarily change during POST and other diagnostic tests.
Figure 46. SX6 Extension blade LEDs
1 - Blade power LED
2 - Blade status LED
3 - Upper 40 GbE QSFP (port 0) status LED
4 - Lower 40 GbE QSFP (port 1) status LED
5 - Upper 1 or 10 GbE port status LED
6 - Lower 1 or 10 GbE port status LED
7 - Upper FC port status LED
8 - Lower FC port status LED
The following table describes the extension blade LED patterns and the recommended actions for those
patterns.
Table 18. Extension blade LED descriptions
LED purpose
Power
86
SAN256B-6 Installation, Service, and User Guide
Color
Steady green
No light (LED is off)
Status
Blade is operational.
Blade is not powered on.
Recommended action
No action required.
Ensure that the blade is
firmly seated, with ejectors
pushed in fully to center of
blade and captive screw for
each ejector fully tightened.