Table of Contents
Advertisement
| |
Table 16. Port blade LED descriptions
| | | |
LED purpose
| | |
| | |
|
Power
|
|
|
|
|
| |
|
|
|
Status
| | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
82
SAN256B-6 Installation, Service, and User Guide
Color
Steady green
No light (LED is off)
No light (LED is off)
Steady amber
Slow-flashing amber (on 2
seconds, then off 2 seconds)
Fast-flashing amber (on 1/2
second, then off 1/2
second)
Status
Blade is operational.
Blade is not powered on.
Blade is either healthy or
does not have power.
Blade is faulty.
Blade is not seated correctly
or is faulty.
Environmental range
exceeded.
Recommended action
No action required.
Ensure that the blade is
firmly seated, with ejectors
pushed in fully to center of
blade and captive screw for
each ejector fully tightened.
Verify that the power LED
is on.
Ensure that the blade is
firmly seated and check the
status by entering the
slotShow command. If LED
remains amber, consult the
device supplier.
Pull the blade out and
reseat it. If LED continues
to flash, replace the blade.
Check for out-of-bounds
environmental condition
and correct it.
Advertisement
Table of Contents
