Table of Contents
Advertisement
|
|
|
|
|
Model
@ 100 VAC
|
| |
|
|
|
name
input
| |
|
|
|
|
SAN512B-6
2647 W
|
|
|
|
|
9034 Btu/hr
|
|
|
|
|
|
|
|
|
|
|
Power consumption for AC power supplies (idle configuration)
|
The idle power consumption configuration features no optics or connections, ports are disabled, the
|
system has booted, and fans are at low speed.
|
| |
|
|
|
|
Model
@100 VAC
| |
|
|
|
|
name
input
|
|
|
|
| |
SAN256B-6
840 W
|
|
|
|
|
2867 Btu/hr
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
SAN512B-6
1515 W
|
|
|
|
|
5171 Btu/hr
|
|
|
|
|
|
|
|
|
|
|
Power consumption for AC power supplies (maximum configuration)
|
The maximum power consumption configuration features fans at maximum speed and the FC32-48 blade
|
installed with optics. Traffic is at full line rate, smallest packet is 64 bytes, the ambient temperature is
|
40°C (104°F), and maximum power is used for all supported optics. Power specifications do not include
|
|
the power draw for the SX6 extension blade.
Note: Volt-ampere (VA) power measurement is provided only for power consumption using the
|
|
maximum chassis configuration. For VA power measurements for your configuration, contact your IBM
representative.
|
240
SAN256B-6 Installation, Service, and User Guide
@ 200 VAC
@ -48 VDC
input
input
2589 W
Not
supported
8836 Btu/hr
@200 VAC
@-48 VDC
input
input
822 W
Not
supported
2806 Btu/hr
1481 W
Not
supported
5055 Btu/hr
Minimum number of power
supplies
3 power supplies for AC low
line (100–120 VAC)
2 power supplies for AC high
line (200–240 VAC)
2 power supplies provide
system power, but 3 or 4 must
be installed to provide power
efficiency and redundancy.
Minimum number of power
supplies
2 power supplies for AC low
line (100–120 VAC)*
1 power supply for AC high
line (200–240 VAC)
One power supply provides
system power, but two must
be installed to provide power
efficiency and redundancy.
2 power supplies for AC low
line are not supported as an
HA (redundant) configuration.
3 power supplies for AC low
line (100–120 VAC)
2 power supplies for AC high
line (200–240 VAC)
Two power supplies provide
system power, but 3 or 4 must
be installed to provide power
efficiency and redundancy.
Notes
SAN512B-6 fully
loaded: 2 CP
blades, 2 CR
blades, 8 FC32-48
port blades, 3 fan
assemblies
Notes
SAN256B-6 fully
loaded: 2 CP
blades, 2 CR
blades, 4 FC32-48
port blades, 2 fan
assemblies
SAN512B-6 fully
loaded: 2 CP
blades, 2 CR
blades, 8 FC32-48
port blades, 3 fan
assemblies
Advertisement
Table of Contents
