Removing The Battery - IBM SAN256B-6 Installation, Service And User Manual

Removing the battery

CAUTION:
The battery contains lithium. To avoid possible explosion, do not burn or charge the battery. Do not:
v Throw or immerse into water
v Heat to more than 100°C (212°F)
v Repair or disassemble
Exchange only with the IBM-approved part. Recycle or discard the battery as instructed by local
regulations. In the United States, IBM has a process for the collection of this battery. For information,
call 1-800-426-4333. Have the IBM part number for the battery unit available when you call. (C003)
Local regulations may require removing the battery prior to disposing of or recycling this product.
Complete these steps to remove the battery.
1. Disconnect all power and communication cables.
2. Remove all transceivers.
3. Remove the power supplies and fans.
4. Unscrew the fasteners and remove the sheetmetal cover from the chassis.
5. On the main circuit board, go to location 1 shown in Figure 82 and remove the BR1225 battery from
the holder.
Figure 82. Location of battery holder
6. Recycle the battery as appropriate, following local regulations.
205
© Copyright IBM Corp. 2018