Rack Mount Kits - IBM SAN256B-6 Installation, Service And User Manual

|
Table 2. OS-dependent FRUs (continued)
|
| | | | | FRU
| |
FC32-64 blade
| | |
|
|
|
|
|
|
|
|
|
|
CPX6 blade
| | | |
|
CR32-4 blade
| | | |
|
|
|
SX6 blade
| | | |
|
|
|
|
WWN card
| | | |
|
Blade slot filler
| | | | |
panel
|
|
Power supply
| | | |
| assembly slot filler
|
| panel
|
| |
Table 3. Rack mount kits
| | | Kit
| | |

Rack mount kits

| |
| |
| |
|
xxviii
SAN256B-6 Installation, Service, and User Guide
Part Number Short Description
Port blade with 16 QSFP+ FlexPorts
XBR-X6-0164
that can be configured for FC or
FCoE operation. Each port can
operate at speeds up to 4x32 Gbps
port for a total of 64 32 Gbps ports
per blade with FC transceivers
installed. Optionally, you can install
Ethernet transceivers and configure
for FCoE operation. Various GbE
speeds are supported.
XBR-CPX6-0103 Control processor (CP) blade
XBR-X64-0106 Core routing (CR) blade with 8
4x32-Gbps QSFP+ ports for
SAN256B-6 Director
XBR-SX6-0000 Extension (X) blade with 16 32-Gbps
Fibre Channel SFP+ ports, 16 10-GbE
SFP+ ports, and 2 40-GbE QSFP+
ports
XBR-X6-0124 World Wide Name card
XBR-X6-0128 Required to cover empty slot to
maintain airflow in chassis.
XBR-X6-0130 Required to cover empty slot to
maintain airflow in chassis.
Part Number Short Description
XBR-DCX4S-0120 27-31-in. rail rack mount kit for four-post rack
XBR-DCX4S-0121 Airflow diversion kit for four-post rack (27–31 in.)
XBR-DCX4S-0130 Airflow diversion kit for four-post rack (18–24 in.)
XBR-X64-0126 8U mid-mount rack kit for X6-4 Director for two-post rack
Currently
Introduced (OS) supported
Fabric OS 8.2.0 Yes
Fabric OS 8.0.1 Yes
Fabric OS 8.0.1 Yes
Fabric OS 8.0.1 Yes
Fabric OS 8.0.1 Yes
Fabric OS 8.0.1 Yes
Fabric OS 8.0.1 Yes