Table of Contents
Advertisement
3. Pull out the spring-loaded latch release at each end of the cover and slide each latch towards the end
of the cover. This should slide the latches into the chassis and lock the panel in place. If not, the cover
may not be seated fully into the slot. Try unlatching both ends, pushing the cover firmly into the slot,
then latching both ends again.
Note: Be sure filler panels are securely latched. If not, high pressure from fan operation may unseat
blade from chassis connectors.
Figure 75. Removing and installing the blade filler panel
4. Reinstall the chassis door. The door must be installed to meet EMI compliance.
181
Blade Filler Panels
Advertisement
Table of Contents
